Help - ABS / Hill Start Assist - Lounge Transit Connect - Ford Transit Connect Forum. D.M.C.A. 317. Region: Share. Posted December 27, 2020. +1 on the scan tool. Also may be a connection issue, dirty sensor etc. First step would be to pull the wheels and check the sensors to make sure they are clean. The hill assist doesn't engage until you press the brake pedal and come to a full stop on a hill. Once you release the brake pedal the hill assist keeps the brakes engaged until you've applied enough acceleration to start moving forward. Once you have the vehicle moving, if you lay off the gas, it will roll back down hill. the hill-start effect and the reductions in the parking brake release delay, friction work and starting jerk. Finally, we further validate the effective implementation of the hill-start assist with the proposed controller on 8.2 %, 13 % and 20 % slopes in the vehicle experiment. The HSA system is designed to assist the driver when starting a vehicle from a stop on a hill. HSA will maintain the level of brake pressure the driver applied for a short period of time after the driver takes their foot off of the brake pedal. The hill assist light is the only light that is on the abs and traction control lights being on seem to be the probably everyone else is having. I thought about the fuses, but I only know of the Fuse panel under the hood right by the battery. I checked those a few minutes ago, and nothing looked to be blown. u0rigl5.

how does hill start assist work